If at some point in the project you detect a problem go back and check your work carefully. Are all the ICs inserted with the same orientation of pin 1? Are all of the pins correctly inserted in the socket holes? Look for shorts between pins that you've soldered. One of your memory components may be bad try exchanging rows and running the ml monitor to see if you can get at least an '03' for top bank thereby narrowing the location of the bad part to bank 4. If you still have a problem back out the work you've done until the machine works ok and seek some technical help.
For those of you who don't have access to an inexpensive source for the parts used in this project or need more detailed instructions on how it should be performed we are putting together a kit of parts including the sockets, capacitors, and memory ICs, along with complete step by step instructions and a component layout dia